In our previous article, we said that one of the ways to protect your sink from stains and scratches is by using a sink protector. So in this article, we are going to review the best stainless steel sink protector that should be top of your list.
While there a number of sink protectors out there, stainless steel protectors are ideal because they are rust and corrosion-resistant.
Best sink protector rack comparison table
| Brand | Product Image | Features |
|---|---|---|
| MONSINTA Kitchen sink grid |
 | Made from premium stainless steel, designed for single bowl sinks, rubber feet as protective bumpers, and versatile. |
| LQS Kitchen Sink Grid |
 | Does not rust or corrode, is multipurpose and easy to use, has a rear drain and cutlery that does not fall through, and has protective bumpers. |
| Starstar Stainless steel sink protector 60/40 |   | Very sturdy, easy to clean, different sizes available and they fit perfectly. |
| Serene Valley Sink protector grid |
 | Premium stainless steel, heavy duty, very sturdy and has plastic feet for protection. |
| Primica sink protector rack |
 | Comes in 2 pieces set, racks have universal fit, drain is centrally located, racks can be used to dry dishes, has enough room for the food and water to pass through. |
Best stainless steel sink protector
1. MONSINTA Kitchen sink grid
MONSINTA sink grid is made from premium stainless steel.
It is designed for single bowl sinks but comes in a wide range of sizes.
This protector has a rear drain to ease drainage and enable you to push garbage down the drain.
In addition, it has rubber feet known as protective bumpers which protect the sink from scratches.
Most importantly, it is very versatile in that it can also be used as a drying rack for crockery and glassware.
Pros
- It is corrosion resistant
- Good height so food does not get stuck underneath it
- It does not scratch the sink with its feet
- Good size grate so silverware does not slip through
- Easily to clean
- Do not stain as silicone sink protectors do.
Cons
- You need to get the measurements of your sink right before placing an order.
2. LQS Kitchen Sink Grid
LQS kitchen sink protector mat is also made from durable stainless steel with a chrome-plated finish.
It can be used as a sink mat as well as a drying rack.
With this sink mat, you don’t have to worry about leaving your metal pots and pans in the sink after cleaning.
The rack keeps crockery and silverware off the sink surface; hence, preventing scratches and stains.
It comes in different sizes so you must measure your sink first so that you get the correct size.
This grid is meant for single sink bowls and has a rear drain for passing food waste when cleaning dishes.
Pros
- It does not rust or corrode
- Multipurpose and easy to clean
- Strong, sturdy, and durable
- Different sizes to choose from
- It has a rear drain
- Cutlery does not fall through
- Has protective bumpers to prevent scratching the finish on the sink surface
Cons
- None so far
3. Starstar Stainless steel sink protector 60/40
A 60/40 is a double sink with one wide basin measuring about 18 inches while the smaller one usually measures 14 inches wide.
The Starstar sink protector is perfect for protecting 60/40 double sinks from damage and scratches by dishes, silverware, and pots.
It is constructed from premium stainless steel and cushioned by soft protective bumpers at the bottom to prevent scratching of the sink surface.
Pros
- Very sturdy
- Durable
- Easy to clean
- Different sizes available
- They fit perfectly
Cons
- These sink grids may run smaller than what is listed by the manufacturer. So take your sink’s measurements very carefully.
4. Serene Valley Sink protector grid
This protector grid has a corner radius of 3 -1/2 inches so as to perfectly fit standard-size kitchen sinks.
It is made from 304 premium stainless steel with a heavy-duty design, which ensures durability. So they are not weak and flimsy like most sink protectors out there.
When placing an order, remember that kitchen sinks have different corner radius so it is important to ensure that it matches your sink’s radius.
This sink grid can be used as a drying rack as well as to protect porcelain sinks.
Pros
- Rust-free
- Premium quality
- Heavy duty
- Rear drain
- Very sturdy
- Has plastic feet for protection
Cons
- None so far
5. Primica sink protector rack
Primica sink protectors come in 2 pieces set, which makes them are ideal for a double sink.
They have a solid construction of chrome-plated stainless steel with vinyl feet that helps to protect the sink from scratches.
Most importantly, the racks have a universal fit so they can be used on any standard-sized sink.
The drain is centrally located to allow easy disposal of garbage through the drain.
Apart from being used as sink mats, these racks can be used to dry dishes or as a cooling grid.
In addition, they have enough room underneath to allow food and water to flow through easily.
Pros
- Very sturdy
- Rust-free stainless steel
- Universal fit
- Ideal for double sinks
- They have vinyl feet and protective bumpers
- Easy to clean
- Dishwasher safe
Cons
- None so far
FAQ stainless steel sink protector grid
It is crucial to measure the size of the sink bowl prior to placing your order.
Taking the measurement is quite easy and here is the process:
– Start with the length of the sink by measuring the inside of the bowl about 1 inch from the bottom of the sink. Do not measure the top inside as this will result in wrong measurements.
– Deduct ½ inch from the length. This is meant to leave some space to allow you to place the sink grid with ease inside the bowl.
– Take the width of the sink by measuring 1 inch from the bottom of the sink.
– Again, reduce ½ inch from the width to make it easy to insert the grid.
– Finally, consider the drain hole in your sink to ensure that the location matches the one on the sink grid you choose.
See also: Ways to remove scratches from stainless steel sink
Conclusion
In this article, we have reviewed the best stainless steel sink protector.
The good this about stainless steel sink protector racks is that they are rust-free and very easy to clean and maintain.
Before placing your order, it is very important to get the measurements right. You need to get the length, width and determine the location of the drain hole. This will ensure that the sink grid you pick is compatible with your sink.